Custom Ice Rinks - Resurfacer

The RinkRover ™ by Custom ice
Simplify your ice rink maintenance with the RinkRover ™ by Custom Ice.
For natural or refigerated rinks, the Rink Rover™ will make a perfect ice sheet
faster and easier. Save your time and effort with the RinkRover™ by Custom Ice,
the ice rink engineering specialists.

WHAT IT IS
Outdoor Ice Rinks require a great deal of maintenance to keep
them looking and performing well. Hand scraping, shoveling,
flooding, and removing snow are all tedious jobs that are
necessary to keep good ice.

The RinkRover™ combines all of these jobs on one common
machine. A 48" wide blade assembly is attached to the rear
of the tractor. This blade scrapes the ice and collects snow
and ice chips from the ice to clean it prior to laying water.
Behind the blade, a 48" water dispensing bar lays the water
evenly and the flooding towel spreads it to create a smooth
and shiny ice surface. The water flow is controlled with a hand
valve that runs fromt he storage tank on top of the front end.

HOW IT WORKS
After a heavy skate, just fill up the tank with 40 gallons of hot
water and drive out on the ice. Turn a switch to lower the blade
then open the water valve and start driving around the outside
of the rink. Every few laps (2000 sqft) you stop to drop the snow
and continue on again. Once you have done the whole ice
sheet, just raise the blade, and drive off the ice. Remove the
dropped snow from the ice with a shovel and strap on your skates.

48" SCRAPING BLADE
48" FLOODING BAR & WATER SPREADING TOWEL
40 GALLON WATER TANK
ELECTRIC POWERED CONDITIONER
WATER CONTROL VALVE
GASOLINE POWERED

The RinkRover™ by Custom Ice simplifies and speeds up ice maintenance
to give you more time to enjoy your rink. Why spend countless hours scraping
and flooding when you can be skating on your rink. Best of all - it's easy to
use - and it makes a great sheet of ice. Just drop the blade and turn on the
water. The RinkRover™ will do the rest. Suitable for smaller sized rinks
1000 to 7000 sqft. The RinkRover™ is the one piece of equipment for all
your ice maintenance needs.

"Please Note: The RinkRover is sold as a complete unit ONLY as the tractor chassis itself has been modified. The attachments are NOT available for sale separately. We require a minimum of 8-12 weeks for delivery on all orders."